LIGHT-UP SOFTWARE

Slide

LIGHT-UP PLAY

LIGHT-UP PLAY is the controller to get familiar with the software packages. LIGHT-UP PLAY can control 100 DMX channels in LIGHT-UP and 128 channels in LED-UP. The number of scenes you can save is limited to 20. This controller is designed for small setups and has 1 direct DMX output.

LIGHT-UP PRO

With the LIGHT-UP PRO interface you have 512 DMX channels directly from the controller and also an added 4 x 512 DMX out via Art-Net. The software has an extensive effect generator for moving heads and pixel controllers. If you need more than 5 universes at your disposal, connect an interface to double your DMX outputs. With the built-in timeline you can easily program a timecoded show up to 30 minutes. By using the included software DRAW-UP you can design and visualize your stages and pre-program your new lighting effects.

LIGHT-UP – STANDALONE

The LIGHT-UP STANDALONE is the solution for situations where complex lightshows need to be operated by people who do not understand them. Lightshows are programmed on the computer and then stored in this controller. The user operates the lightshow by pressing 1 of the 8 pre-set buttons. This controller has an internal memory (4mb 4000steps) but is expandable with an SD card. In addition to manual operation, it is possible to start shows on a certain time or date, but also by means of triggers.

Specifications

LIGHT-UP PLAY
  • 1 XLR output – 128 DMX channels in LED-UP
  • 1 USB-INTERFACE with 100/128 DMX channels
  • 100 DMX channels standalone, IR controllable
LIGHT-UP PRO
  • 1 XLR universe; 5 Art-Net universes; usb dongle; stand-alone
  • 1 USB-INTERFACE with 512 DMX channels
  • 5 universes Art-Net by RJ45 connector from computer
  • 256 DMX channels standalone, IR controllable
LIGHT-UP STANDALONE
  • 1 USB-INTERFACE with 512 DMX channels
  • 4 universes Art-Net by RJ45 connector from computer
  • 512 DMX channels standalone, IR controllable